How to apply Hempel's Antifouling onto unknown AF

Learn more

Follow our Step By Step instructions on how to apply Hempel's AF onto unknown antifouling

Step-1

Step 1

Ensure you wear suitable protective clothing, including a mask and protective glasses.

Step-2

Step 2

If you are not sure what antifouling you have on your boat, before applying new Antifouling on top of it, you should seal the surface with Hempel’s Underwater Primer.

Step-3

Step 3

Mix the product well.

Step-4

Step 4

Pour enough paint for the job into suitable container and make sure to remove excess paint from the roller.

Step-5

Tutorial 5

Apply Hempel’s Underwater Primer on the surface that is in a good condition and free from contaminates.

Step-6

Step 6

When the surface is dry/almost dry, apply the chosen antifouling. To choose the correct antifouling, check our Paint Manual.

Step-7

Step 7

Open the can with care. Pour enough paint for the job into suitable container and make sure to remove excess paint from the roller.

Step-8

Step 8

Fast application is more important than a very smooth finish. Use a “crisscross” technique, apply from side to side and then from up to down on the same area.

Know what you're looking for?