Silic One

New boat or without epoxy

New boat or without expoxy

Surface preparation: clean with a suitable detergent and sand with dry abrasive paper (P120). Carefully clean with water and allow the surface to dry.

Application: apply layers of the system as indicated. In case the recoating interval is exceeded, a new coat of Hempel’s Light Primer or Silic One Tiecoat must be applied accordingly

*The Silic One Tiecoat must be applied to full coverage to ensure adhesion. **After 48 hours surface must be cleaned with Pre-Clean 67602, rinsed with fresh water and allowed to dry before applying the next coat. Overcoating must be carried out as soon as possible after surface has dried. *** Valid for each layer.

Yacht Paint Calculator


How to

From basic explanations to high end tricks of the PRO's, Hempel bring useful tutorials of the yacht painting process. If in doubt, check this section out, we have just what you need.

Find a retailer

Tell us where you are or navigate on the map. You will find a Hempel retailer nearest to you.